Faka i-HUD efana nobunye kuyo nayiphi na indawo esekwe kubuntu

Njengoko abo basebenzisa Ubuntu ngobunye baya kuba sele besazi, le distro iza nesixhobo esiluncedo kakhulu esifakelweyo esivumela fumana kusuka iinkqubo ezifakiweyo iifayile kwiPC yethu. Esi sixhobo saziwa njenge HUD (Iintloko eziPhakanyisiweyo) kwaye yenza umsebenzi wokukhangela ifayile okanye usetyenziso olulahlekileyo lwenkqubo yethu lula kakhulu.

Kule nqaku sifuna ukukubonisa ukuba singayifaka njani i-Unity HUD kwi-Ubuntu MATE, kwiLinux Mint, kwiXubuntu, kwaye ekugqibeleni nayiphi na Ubuntu esekwe kwi-distro. Sikuxelela.

• Ayisebenzi kwiFirefox okanye ngeThunderbid
• Ayisebenzi nge-QT5 zokusebenza
• Ayisebenzi ngeLibreOffice.
• Ukusebenza kunye nezicelo zeJava ezisebenzisa ithala leencwadi elijikayo, kuyakufuneka ufake UJAvatana.

Ukufaka i3-hud-menu

Okokuqala, kuya kufuneka ufake iipakethi ezimbalwa, ezizezona zisisiseko python3, ipython-dbus, dmenu, usetyenziso-lwe-qt, imanyano-gtk-imodyuli, kwaye wget. Ukwenza oku, sebenzisa nje:

Sudo apt ukufaka python3 python-dbus dmenu appmenu-qt ubunye-gtk2-imodyuli yomanyano-gtk3-imodyuli wget

Ngoku sinokuqhubeka nokukhuphela kunye nokufaka usetyenziso. Ngale nto senza oku kulandelayo:

cd /tmp
wget https://github.com/jamcnaughton/i3-hud-menu/archive/master.tar.gz
tar -xvf master.tar.gz
sudo mkdir -p /opt/i3-hud-menu
sudo cp -r i3-hud-menu-master/* /opt/i3-hud-menu/

Ngokusisiseko, into esiyenzayo kukufumana yonke ikhowudi yemithombo yolwazi kwindawo yokugcina izinto yaseGithub, siyigcine kwi / tmp /, uyivule iziphu kwaye wenze umkhombandlela apho siza kukopa yonke iprojekthi.

Ngoku, kufuneka sivule ifayile ~ /.iiprofayili yenkqubo yethu. Ubona njani xa uqala ngo "." Yifayile efihliweyo, ke ukuba uza kuyivula ngokuzoba, ukuze uyijonge kuya kufuneka ucofe i-Ctrl + H.

Nje ukuba ifayile ivulwe, songeza le khowudi yemithombo ilandelayo ekupheleni kwayo:

export APPMENU_DISPLAY_BOTH=1
if [ -n "$GTK_MODULES" ]
then
GTK_MODULES="$GTK_MODULES:unity-gtk-module"
else
GTK_MODULES="unity-gtk-module"
fi

if [ -z "$UBUNTU_MENUPROXY" ]
then
UBUNTU_MENUPROXY=1
fi

export GTK_MODULES
export UBUNTU_MENUPROXY

Ukuba ayisebenzi kuwe, ungazama ukukopa le khowudi yemithombo enye kwifayile ~ / .bashrc.

Ngoku, kwaye njengenyathelo lokugqibela, kufuneka senze isicelo sisebenze ekuqaleni kweseshoni yethu. Ukwenza oku, kuya kufuneka senze inkqubo eqhutywa ekuqaleni ibizwa ngokuba i3-appmenu-service.py ngaphakathi kolawulo ~/ khetha / i3-hud-imenyu /. Ukuba uku Xubuntu, ungaya ku Ukuseta kwenkqubo, emva koko ungene Iseshoni kunye nokuqalisa (okanye ilingana neSpanish), emva koko nge Ukusebenza ngokuzenzekelayo kwaye ekugqibeleni ucofe Yongeza uze ugcwalise ulwazi ngolu hlobo lulandelayo:

• En igama Kuya kufuneka sibeke "i3 inkonzo yemenyu", okanye igama elincedayo ekuchongeni usetyenziso.
• En Descripción Singabhala inkcazo encinci malunga nokuba isicelo senzani, nangona eli candelo lingeyomfuneko.
• En umyalelo Kuya kufuneka sibeke umendo wenkqubo, kwimeko yethu /opt/i3-hud-menu/i3-appmenu-service.py.

Indlela yokongeza izicelo zokuqalisa ixhomekeke kwi-distro esiyisebenzisayo, kodwa ngokubanzi kufuneka sihlale silandela "indlela" efanayo: Ukucwangciswa -> Izicelo zokuqalisa -> Yongeza kwaye ekugqibeleni ugcwalise amasimi njengoko besesitshilo.

Ngoku, into enomdla iya kuba nakho ukuvula esi sicelo usebenzisa indibaniselwano yezitshixo, akunjalo?

Ewe, ukwenza njalo, kufuneka siye kuqwalaselo lwenkqubo, kwaye ucofe kwi-tab:

• Ikhibhodi kwiXubuntu.
• Iindlela ezimfutshane ezinqumlayo Ubuntu Ubuntu.
• Yongeza indlela emfutshane KwiLinux Mint.

Emva koko, kuya kufuneka sikhethe indibaniselwano yezitshixo esizifunayo (kwimeko yam (Alt + L), kwaye siya kufumana iwindow ngolu hlobo lulandelayo:

Kuza kufuneka sibhale umendo wenkqubo oza kuyenza, ekuyiyo kwimeko yethu /opt/i3-hud-menu/i3-appmenu-service.py en umyalelo (okanye inguqulelo yayo ngeSpanish).

Ukusukela ngoku kuya kuba lula xa ujonga izicelo kwindlela yakho. Kude kube lixesha elizayo 😉

Umthombo woqobo: Wepupd